Detailed Product Description

Set distance 0 to 1.2 mm

Differential travel 10% max. of sensing distance

Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on pages 13 and 14.)

Standard sensing object:Iron,8 × 8 × 1 mm

Response frequency*1 :2 kHz

Power supply voltage (operating voltage range) *212 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.

Current consumption: 13 mA max.

Control output Load current *2 200 mA max.

Residual voltage 2 V max. (Load current: 200 mA, Cable length: 2 m)

Indicators: Operation indicator (red)

Operation mode (with sensing object approaching) :E1 Models: NO E2 Models: Refer to the timing charts under I/O Circuit Diagrams on page 16 for details. F1 Models: NO

Protection circuits: Load short-circuit protection, Surge suppressor, Reverse polarity protection.

Ambient temperature range *2 :Operating/Storage: 40 to 85°C (with no icing or condensation)

Ambient humidity

range Operating/Storage: 35% to 95%

Temperature

influence

±15% max. of sensing distance at 23°C in the temperature range of 40 to 85°C

±10% max. of sensing distance at 23°C in the temperature range of 25 to 70°C

Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case

Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current carry parts and case

Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X,Y,and Z directions

Shock resistanceDestruction: 500 m/s210 times each in X, Y, andZ directions

Degree of protection Pre-wired Models : IEC 60529 IP67, in-house standards: oil-resistant

Connector Models : IEC 60529 IP67

Connection method Pre-wired Models (Standard cable length: 2 m) and Connector Models

Weight Prewired Models :Approx. 65 g Approx.

ConnectionModels :Approx. 15 g Approx.

Materials Case Stainless steel (SUS303)

Sensing surface :PBT

Clamping nuts: Nickel-plated brass

Toothed washer :Zinc-plated iron

Accessories :Instruction manual

E2E-X1R5E1-Z 2M